View 74LVC11_19463.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74LVC11 Triple 3-input AND gate
Product specification 1998 Apr 28
Philips Semiconductors
Philips Semiconductors
Product specification
Triple 3-input AND gate
74LVC11
FEATURES
* Wide supply voltage range of 1.2 V to 3.6 V * In accordance with JEDEC standard no. 8-1A. * Inputs accept voltages up to 5.5 V * CMOS low power consumption * Direct interface with TTL levels * Output capability: standard * ICC category: SSI
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25C; tr = tf v2.5 ns SYMBOL tPHL/tPLH CI CPD PARAMETER Propagation delay nA, nB, nC to nY Input capacitance Power dissipation capacitance per gate
DESCRIPTION
The 74LVC11 is a high-performance, low power, low-voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. The 74LVC11 provides the 3-input AND function.
CONDITIONS CL = 50 pF; VCC = 3.3 V Notes 1 and 2
TYPICAL 3.7 5.0 26
UNIT ns pF pF
NOTES: 1. CPD is used to determine the dynamic power dissipation (PD in W) PD = CPD x VCC2 x fi ) (CL x VCC2 x fo) where: fi = input frequency in MHz; CL = output load capacity in pF; fo = output frequency in MHz; VCC = supply voltage in V; (CL x VCC2 x fo) = sum of the outputs. 2. The condition is VI = GND to VCC.
ORDERING INFORMATION
PACKAGES 14-Pin Plastic SO 14-Pin Plastic SSOP Type II 14-Pin Plastic TSSOP Type I TEMPERATURE RANGE -40C to +85C -40C to +85C -40C to +85C OUTSIDE NORTH AMERICA 74LVC11 D 74LVC11 DB 74LVC11 PW NORTH AMERICA 74LVC11 D 74LVC11 DB 74LVC11PW DH DWG NUMBER SOT108-1 SOT337-1 SOT402-1
PIN CONFIGURATION
1A 1B 2A 2B 2C 2Y GND 1 2 3 4 5 6 7 14 VCC 13 1C 12 1Y 11 3C 10 3B
LOGIC SYMBOL (IEEE/IEC)
1 2 13 3 4 5 9 10 11 & 12 &
6
&
8
SV00439
9 8 3A 3Y
SV00416
1998 Apr 28
2
853-2060 19308
Philips Semiconductors
Product specification
Triple 3-input AND gate
74LVC11
PIN DESCRIPTION
PIN NUMBER 1, 3, 9 2, 4, 10 7 12, 6, 8 13, 5, 11 14 SYMBOL 1A - 3A 1B - 3B GND 1Y - 3Y 1C - 3C VCC NAME AND FUNCTION Data inputs Data inputs Ground (0 V) Data outputs Data inputs Positive supply voltage
LOGIC DIAGRAM (ONE GATE)
A B C Y
SV00421
FUNCTION TABLE
INPUTS nA L L nB L L H H nC L H L H OUTPUTS nY L L L L
LOGIC SYMBOL
1 2 13 1A 1B 1C 1Y 12
L L
3 4 5
2A 2B 2C 2Y 6
H H
L L H H
L H L H
L L L H
9 10 11
3A 3B 3C 3Y 8
H H NOTES: H = HIGH voltage level L = LOW voltage level
SV00438
RECOMMENDED OPERATING CONDITIONS
SYMBOL VCC VCC VI VO Tamb tr, tf PARAMETER DC supply voltage (for max. speed performance) DC supply voltage (for low-voltage applications) DC input voltage range DC output voltage range Operating free-air temperature range Input rise and fall times VCC = 1.2 to 2.7V VCC = 2.7 to 3.6V CONDITIONS LIMITS MIN 2.7 1.2 0 0 -40 0 0 MAX 3.6 3.6 5.5 VCC +85 20 10 UNIT V V V V C ns/V
1998 Apr 28
3
Philips Semiconductors
Product specification
Triple 3-input AND gate
74LVC11
ABSOLUTE MAXIMUM RATINGS1
In accordance with the Absolute Maximum Rating System (IEC 134) Voltages are referenced to GND (ground = 0V) SYMBOL VCC IIK VI IOK VO IO IGND, ICC Tstg PTOT PARAMETER DC supply voltage DC input diode current DC input voltage DC output diode current DC output voltage DC output source or sink current DC VCC or GND current Storage temperature range Power dissipation per package - plastic mini-pack (SO) - plastic shrink mini-pack (SSOP and TSSOP) above +70C derate linearly with 8 mW/K above +60C derate linearly with 5.5 mW/K VI t 0 Note 2 VO uVCC or VO t 0 Note 2 VO = 0 to VCC CONDITIONS RATING -0.5 to +6.5 -50 -0.5 to +5.5 "50 -0.5 to VCC +0.5 "50 "100 -65 to +150 500 500 UNIT V mA V mA V mA mA C
mW
NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions voltages are referenced to GND (ground = 0V) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40C to +85C MIN VIH HIGH level Input voltage VCC = 1.2V VCC = 2.7 to 3.6V LOW level Input voltage VCC = 1.2V VCC = 2.7 to 3.6V VCC = 2.7V; VI = VIH or VIL; IO = -12mA VO OH HIGH level output voltage VCC = 3.0V; VI = VIH or VIL; IO = -100A VCC = 3.0V; VI = VIH or VIL; IO = -12mA VCC = 3.0V; VI = VIH or VIL; IO = -24mA VCC = 2.7V; VI = VIH or VIL; IO = 12mA VOL LOW level output voltage VCC = 3.0V; VI = VIH or VIL; IO = 100A VCC = 3.0V; VI = VIH or VIL; IO = 24mA II ICC ICC Input leakage current Quiescent supply current Additional quiescent supply current per input pin VCC = 3 6V; VI = 5 5V or GND 3.6V; 5.5V VCC = 3.6V; VI = VCC or GND; IO = 0 VCC = 2.7V to 3.6V; VI = VCC -0.6V; IO = 0 "0.1 "0 1 0.1 5 GND VCC*0.5 VCC*0.2 VCC*0.6 VCC*1.0 0.40 0.20 0.55 "5 10 500 A A A V VCC V VCC 2.0 GND V 0.8 TYP1 MAX V UNIT
VIL
NOTE: 1. All typical values are at VCC = 3.3V and Tamb = 25C.
1998 Apr 28
4
Philips Semiconductors
Product specification
Triple 3-input AND gate
74LVC11
AC CHARACTERISTICS
GND = 0 V; tr = tf v 2.5 ns; CL = 50 pF; RL = 500W; Tamb = -40_C to +85_C LIMITS SYMBOL PARAMETER Propagation delay nA, nB, nC to nY WAVEFORM MIN tPHL/tPLH 1, 2 - VCC = 3.3V 0.3V TYP1 3.7 MAX 6.2 VCC = 2.7V MIN - MAX 7.0 ns UNIT
NOTE: 1. These typical values are at VCC = 3.3V and Tamb = 25C.
AC WAVEFORMS
VM = 1.5 V at VCC w 2.7 V VM = 0.5 S VCC at VCC < 2.7 V VOL and VOH are the typical output voltage drop that occur with the output load.
Vl nA, nB, nC INPUT GND t PHL V OH nY OUTPUT VOL VM t PLH VM
TEST CIRCUIT
VCC S1 2 * VCC Open GND
500 VI PULSE GENERATOR RT D.U.T. VO
50pF
CL
500
SWITCH POSITION
SV00423
TEST tPLH/tPHL S1 Open VCC < 2.7V 2.7-3.6V VI VCC 2.7V
Waveform 1. Input (nA, nB, nC) to output (nY) propagation delays.
SV00903
Waveform 2.
Load circuitry for switching times.
1998 Apr 28
5
Philips Semiconductors
Product specification
Triple 3-input AND gate
74LVC11
SO14: plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
1998 Apr 28
6
Philips Semiconductors
Product specification
Triple 3-input AND gate
74LVC11
SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm
SOT337-1
1998 Apr 28
7
Philips Semiconductors
Product specification
Triple 3-input AND gate
74LVC11
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm
SOT402-1
1998 Apr 28
8
Philips Semiconductors
Product specification
Triple 3-input AND gate
74LVC11
NOTES
1998 Apr 28
9
Philips Semiconductors
Product specification
Triple 3-input AND gate
74LVC11
Data sheet status
Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 08-98 9397-750-04483
Philips Semiconductors
yyyy mmm dd 10

▲Up To Search▲

Price & Availability of 74LVC11

	To Download 74LVC11 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .